2-Inch Inflatable Pipe Plug Sewer Test Balloon – Rubber Plumbing Plug With 40" Hose, Accessories (2–20" Sizes Available)

About This Product

If you're doing plumbing inspections, sewer line testing, or blocking off pipes during construction, this inflatable test plug is a tool you'll be glad to have.

This one is 2 inches in diameter, but the same line comes in sizes from 2 up to 20 inches, so you can pick exactly what you need for your job.

It's made from natural rubber with reinforced ribs and a wall thickness of 3 to 4.
5mm, so it expands nicely to seal tight and holds up to 20 kPa (0.

02 MPa) of working pressure—enough for most residential and light commercial testing.
It comes with a 40-inch extension hose, a valve core, and two hose clips, so you can inflate it even if the pipe is recessed or hard to reach.
All the accessories are linked right to the plug, so you won't lose 'em.
Use it on PE pipes, HDPE corrugated, PVC, metal, or cement pipes for water-blocking and water-tightness tests.
When you're done, just deflate and pull it out.
Store it away from sunlight and strong acids/alkalis, and dust it with talc for long-term storage.
If something goes wrong, they'll replace it quick.

Solid, practical tool for pros and serious DIYers.