Underground Wire Splice Kit For Submersible Pumps – 3 Copper Butt Connectors + 10 Heat Shrink Tubes, For 10-12-14 AWG Cables, Weatherproof & Waterproof Seal

About This Product

When you're splicing wires for a submersible pump, an outdoor lighting system, or any underground cable, you absolutely need a connection that stays dry and solid for years.

This kit gives you everything you need to do it right – three seamless copper butt connectors and ten heat shrink tubes, all designed to create a waterproof, weatherproof splice that you can trust.

The butt connectors are sized to fit 10, 12, and 14 AWG wires, which covers most common pump and outdoor wiring applications.

They're made from high-quality copper for excellent conductivity and come with a gold finish that resists corrosion.

Once you crimp the connector onto your wires, you slide the heat shrink tube over the splice and apply heat – from a heat gun, lighter, or even a lamp – until the tube shrinks down tight and the built-in sealant oozes out at the ends.

That oozing is actually your visual confirmation that the seal is complete and waterproof.

This kit is specifically designed for submersible pump installations, but it's also great for any outdoor or wet location where you need to join wires.

The instructions are straightforward – even if you're not an electrician, you can get a professional-quality result with just a heat source and a few minutes of your time.

Don't settle for electrical tape or cheap connectors that will fail in a few months.
This splice kit is built to last, and it gives you confidence that your wiring won't leave you high and dry (literally).