Metric Thread Tap M15 X 3.0 – HSS Straight Flute Right Hand Machine Tap, 95mm Length, For Through Holes & Shallow Blind Holes

About This Product

Need to cut or repair M15 threads?

This straight flute tap is built for the job.

It's a right-hand M15 x 3.
0 tap – total length 95mm (3.
74 inches), with a thread head of 30mm and a square shank of 9x9mm.

Made from high-speed steel, so it's got the hardness and toughness to handle a variety of metals – steel, copper, aluminum, brass, cast iron, even stainless steel.

The straight flute design works best for through holes or shallow blind holes – not for deep blind holes, since chips need a path out.

It's compatible with tapping machines, drill presses, CNC lathes, or manual setups.

Recommended feed speeds vary by material: 6-15 m/min for general steel, 5-10 for harder steel, 2-7 for stainless, and 8-10 for cast iron.

Rule of thumb – harder material, slower speed.

Pro tip: drill your pilot hole first, use coolant or cutting oil to keep things cool, and go easy if you feel resistance.
After use, clean and apply anti-rust oil to keep it sharp for the next job.
One tap per package – a solid addition to any machinist's toolbox.