AtticZone M18 X 2.5 Metric Round Thread Die – Right Hand, 2.5mm Pitch, High-Speed Steel, For External Thread Repair & Cleaning

About This Product

If you do any kind of metalwork or maintenance, having a solid thread die on hand is a must.
This one from AtticZone is an M18 x 2.

5 round die with a 2.

5mm pitch and right-hand threads.

It's made from high-speed alloy steel, so it's tough and wear-resistant—perfect for cutting new threads, cleaning up banged-up ones, or just doing general thread repairs.
Just remember, this is a hand tool, not meant for machine use, so keep it for manual jobs.

It's got big chip removal holes to clear out metal shavings smoothly, and the conical locking hole keeps it snug on your die stock so it won't wobble.

Best practice: back it off every quarter to half turn while cutting to break the chips and keep things clean, and don't forget a little cutting oil to make the job easier and extend the die's life.
Outside diameter is 45mm and it's 18mm thick.

Solid little tool for any workshop or DIY guy who needs reliable external threading.