PATIKIL M10x1 Acorn Cap Nuts – 40-Piece Fine Thread, Carbon Steel Hexagon Dome Nuts, Gold Tone, For Fastener Cover & Decoration

About This Product

These PATIKIL acorn nuts are a simple way to clean up the exposed ends of bolts.

They're M10x1 fine thread, so they fit metric bolts with a 1mm pitch.

The hex shape is 14mm across the flats, and the dome is 12mm tall – a nice compact size that covers bolt ends without sticking out too far.

The gold tone plating adds a bit of shine, making them look way better than plain steel nuts.

Made from carbon steel with an electroplated coating, they're corrosion-resistant and hard enough for regular use.
The deep, uniform threads grab tight and hold strong, so you don't have to worry about them backing off under vibration.

They're great for mechanical equipment, electronics, furniture builds, construction, or anywhere you want to cover ugly bolt threads and give things a finished look.

Installation is dead simple – just thread them on by hand until they bottom out against the surface, then snug with a wrench.
They come in a 40-count pack, which is plenty for most projects.

Whether you're restoring a vintage machine, assembling a piece of furniture, or just want to make your DIY project look pro, these cap nuts add that extra polish.

Make sure you double-check your thread size before ordering – but if M10x1 is what you need, these are a great pick.